原帖由 renwee510 于 20-11-2008 04:40 PM 发表 就是这个咯。
使用道具 举报
原帖由 vR33 于 20-11-2008 02:51 PM 发表 你的板是什么牌子model呢? 除了clear cmos 也可以跟朋友借一张VGA卡来安。monitor再接那张VGA就有Screen了,在进bios改回。
原帖由 syllaw 于 20-11-2008 08:36 AM 发表 你需要进bios enable 回。或许你可以clear CMOS。
@cariinternet
原帖由 syllaw 于 20-11-2008 08:53 AM 发表 你看看你的妈妈板那边又没有一个jumper 是reset BIOS / clear CMOS, reset 后你就可以进。on board VGA是不能换你只能加一张VGA card。
原帖由 君臨ㄟ天下 于 20-11-2008 10:13 AM 发表 先给母板放电。。
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position.Avoid clearing the CMOS while the system is on; it will damage the mainboard.
原帖由 renwee510 于 20-11-2008 10:26 AM 发表 [quote] You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position.Avoid clearing the CMOS while the system is on; it will damage the mainboard.
原帖由 renwee510 于 20-11-2008 03:16 PM 发表 这位大大,我的是msi motherboard 来得。 model是Pm8m来的 谢谢你的意见!
本版积分规则 发表回复 回帖并转播 回帖后跳转到最后一页
佳礼网 面子书
ADVERTISEMENT
版权所有 © 1996-2023 Cari Internet Sdn Bhd (483575-W)|IPSERVERONE 提供云主机|广告刊登|关于我们|私隐权|免控|投诉|联络|脸书|佳礼资讯网
GMT+8, 1-6-2024 05:08 AM , Processed in 0.071772 second(s), 24 queries , Gzip On.
Powered by Discuz! X3.4
Copyright © 2001-2021, Tencent Cloud.