Magelli 250R

28-6-2013 10:49 AM| 发布者: 佳礼编辑 | 评论: 0|原作者: ~jack~

摘要: Engine Spec 250 SECylindersSingle CylinderBore x Stroke (mm)77 x 53.6Displacement (cc)249.6Compression Ratio11.5 : 1Fueling SystemCarburettor (EFI optional)Idle Speed (RPM)1500 +-100 ...

Magelli 250R

Engine Spec 250 SE
Cylinders	Single Cylinder
Bore x Stroke (mm)	77 x 53.6
Displacement (cc)	249.6
Compression Ratio	11.5 : 1
Fueling System	Carburettor (EFI optional)
Idle Speed (RPM)	1500 +-100
Valve Train	4V OHC
Max Power (Hp/RPM)	26/8500
Max Torque (Nm/RPM)	22.8/7000
Lubrication System:	Forced & Wet Sump
Fuel Grade:	Unleaded
Clutch:	Wet Type & Multi Plates
Trans:	6 Speed Gear Change
Gear Shift Pattern:	1-N-2-3-4-5-6
Ignition System:	C.D.I
Starter System:	Electrical Start

Body Spec 250 SE
Main Frame:	A12 Multi Twin Spar Trellis Configuration
Out Riggers:	T6 Aluminum forged Twin
Rear Swing Arm:	T6 Aluminum Trellis with forger dropouts
Steering System:	Twin Plate Bearing Carrier (upper & lower)
Yokes:	T6 Aluminum Forged
Front Forks:	Inverted with Aluminium dropouts
Rear Shock:	Mono Pre-load Adjustment
Seat Height:	800mm
Wheel Base:	1349.6mm
Front Wheel Size (Aluminium):	17:02.75
Rear Wheel Size (Aluminium):	17:03.5
Tyre Size Front:	100/70-17
Tyre Size Rear:	130/70-17
Final Drive:	Cushioned
Front brake and Clutch Levers	Machined Aluminium. 6 point adjustment.
Speedometer	Koso RX2-N
Bodywork	Rear Seat Cowl – colour coded
	Unique Factory Fit Graphics
Handle Bars	Clip on – Aluminium
Net Weight:	123Kg approx

The expected price for this Magelli Megelli 250R is RM15,888.

UPDATE: This bike is British brand, parts from Taiwan and assembled in China. Check it out at Wiki