查看: 1174|回复: 6
|
Recall news
[复制链接]
|
|
Cannondale Issues Recall Notice for Integrated Carbon Cranksets
APRIL 12, 2007 -- BETHEL, CT (BRAIN)--Cannondale has voluntarily issued a safety recall notice with the U.S. Consumer Product Safety Commission. The products affected in the recall include 2007 and a few 2008 Cannondale bicycle models that are equipped with two-piece road and mountain system integrated cranksets. Three-piece system integrated Hollowgram cranksets and three-piece carbon system integrated cranksets are not affected.
Cannondale has learned from Full Speed Ahead, the manufacturer of the cranks, that a manufacturing process error caused a defect in the aluminum spindle portion of the crankset. “A small percentage of spindles were essentially overcooked during heat treatment causing very small cracks in the wall of the spindle,” said Chris Peck, vice president of research and development at Cannondale.
“It’s important to note that this was a manufacturing error on a limited run of goods. The manufacturing process itself is not flawed, nor is it a design flaw. The system integrated, oversized BB30 compatible spindle has been in the Cannondale line since the year 2000 without issues. It is race-proven at the highest level and has passed the highest fatigue testing standards in the industry when manufactured correctly," Peck added.
“FSA is a valuable partner, has taken full responsibility for the error in manufacturing and worked quickly to make the necessary changes to correct it."
Cannondale is conducting a mailing direct to consumers. Both Cannondale and FSA hve put appropriate control procedures in place to ensure quality prior to shipments.
“Rider safety is of paramount importance with this recall. We urge anyone that has purchased one of these bikes to contact their dealer immediately and have your bike inspected,” Peck said.
No injuries have been reported. Approximately 2,300 bicycles may have the defective spindle. Replacement parts will be provided and installed free of charge to individuals affected by the recall.
For more information, visit www.cannondale.com or call the company at (800) BIKE-USA. |
|
|
|
|
|
|
|
发表于 13-4-2007 06:26 PM
|
显示全部楼层
Cannondale 也是用FSA 的 cranksets 的噢?
我还不知道呢, 其实还好pro bikes 都没有问题。
Lowe |
|
|
|
|
|
|
|
楼主 |
发表于 13-4-2007 10:33 PM
|
显示全部楼层
Office of Information and Public Affairs | Washington, DC 20207 |
FOR IMMEDIATE RELEASE
April 10, 2007
Release #07-153 | Firm? Recall Hotline: (800) 346-2928
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908
|
SRAM Corp. Recalls Bicycle Brake Caliper Sets Due to Crash HazardWASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. Name of product: SRAM Force Road Brake Caliper Sets
Units: About 5,400 units
Importer: SRAM Corp., of Chicago, Ill.
Hazard: The brake caliper sets could break and detach from the bicycle? fork or frame. This could cause the rider to lose control and crash.
Incidents/Injuries: None reported.
Description: The recall involves the SRAM Force Road Brake Calipers sets sold as aftermarket components. The brake caliper sets have ?RAM Force?and some have a date or production code embossed on the unit.
CodeExampleIn RecallNot In RecallDate code
(Day/Month/Year)01JUN06Dates between 01JUN06
and 25DEC06Dates after 25DEC06No date code------------All sold between July 2006
through March 2007---------------Production Code35T61234567Codes beginning with
35T6 through 51T6Codes beginning with
52T6 and codes with ??br>as the fourth digit The SRAM brake caliper sets may have also been installed on the following makes and models of bicycles: Specialized (S-Works Tarmac SL, S-Works Roubaix); Trek (Project One Madone models); Fuji (Fuji SL1); Scott USA (Addict R3); Bianchi (Bianchi 928 SL); Kuota (Kuota KOM, Kuota KREDO, Kuota KEBEL); Orbea (Orca, Aqua, Loboular, Opal, Arin, Aqua Dama, Dama Race and Diva); Kestrel (Evoke SL/Force, RT700/Force), Titus (Vuelo, Solera) and Sampson (Diablo).
Sold at: Specialty bicycle retailers nationwide sold individual brake caliper sets from July 2006 through January 2007 for about $270 and bicycles which included these sets through March 2007 for between $3,000 and $7,300.
Manufactured in: Taiwan
Remedy: Consumers should stop using bicycles equipped with these brake caliper sets immediately and contact their bicycle retailer for a free replacement.
Consumer Contact: For additional information, contact SRAM at (800) 346-2928 between 9 a.m. and 5 p.m. CT Monday through Friday or visit the firm? Web site at www.sram.com
|
|
|
|
|
|
|
|
楼主 |
发表于 13-4-2007 10:35 PM
|
显示全部楼层
Specialized Bicycle Components Inc. Recalls Bicycles Due to Fall HazardWASHINGTON, D.C. ?The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.
Name of Product: Bicycles with SW Carbon Stem with Magnesium Faceplate
Units: About 2,700
Manufacturer: Specialized Bicycle Components Inc., of Morgan Hill, Calif.
Hazard: The bicycle? stem has a magnesium faceplate that holds the handlebar in place. The faceplates on the recalled stems can crack allowing the handlebar to break off the bicycle, posing a serious fall hazard.
Incidents/Injuries: Specialized has received five reports of the magnesium faceplate exhibiting cracks. No injuries have been reported.
Description and Models: The SW Carbon Stem with Magnesium Faceplate is black with the words ?-Works?and ?agnesium Faceplate?printed on it. The stems were included as original equipment on the following 2006 bicycles models: S-Works Tarmac, Tarmac Pro, S-Works Roubaix, Roubaix Pro, Allez Pro and S-Works Transition. It was also sold as an after market item under the name S-Works Advanced Composite Mag Road Stem.
Sold at: Authorized Specialized retailers from June 2005 through April 2006 as original equipment of the bicycle models referenced above or as an after market item for about $160.
Manufactured In: Taiwan
R
emedy: Consumers should stop riding the bicycles that have the recalled stems immediately and take them to an authorized Specialized retailer for a free replacement faceplate.
C
onsumer Contact: For additional information, call Specialized at (877) 808-8154 between 7 a.m. and 6 p.m. MT, Monday through Friday, or visit the company? Web site at www.Specialized.com
[size=-1]---
[ 本帖最后由 flim 于 13-4-2007 10:42 PM 编辑 ] |
|
|
|
|
|
|
|
楼主 |
发表于 13-4-2007 10:45 PM
|
显示全部楼层
Lowe 大大。
Pro bike 没有出crank 啦 |
|
|
|
|
|
|
|
发表于 13-4-2007 10:49 PM
|
显示全部楼层
原帖由 flim 于 13-4-2007 10:45 PM 发表
Lowe 大大。
Pro bike 没有出crank 啦
不要叫我大大。。。
其实我说的pro bikes 是 专业车队用的脚车。。。不是‘Pro bike’ 这个牌子。。。
我好像应该说Pro teams.
Liquigas 今年没有用Bianchi 而选了Cannondale. 所以我会这么说。
Lowe |
|
|
|
|
|
|
|
楼主 |
发表于 14-4-2007 12:04 AM
|
显示全部楼层
ok, 了解。
international pro teams manager 选择bikes时一直非常小心, 并且有很多的技术人员校对应该没有问题。 |
|
|
|
|
|
|
| |
本周最热论坛帖子
|